The LD-PD’S PL- HPMI Series is High Power Polarization Maintaining Isolator.This is one High power fiber optic components we special design for Ultra short pulse fiber laser.And now wavelength at 850nm,980nm,1030nm,1064nm,1550nm,1560nm is available,This Unit Can handle maximum average power at 10w.We can help Customize according to Customer’s Requirements.
|Picture||Name||Part NO.||Description||Central wavelength||Handling Power||Connector||Lead Time||Price||Operation|
● High Power Stability
● Low Insertion Loss
● High Isolation
● High Extinction Ratio
Tsub=25°C, CW bias unless stated otherwise
Note: Fast axis blocked，and passed to TAP.
FUD3460 Fiber Nominal Characteristics and Tolerances
● Femto-second Fiber laser application
● Dense wavelength division multiplexing (DWDM)
● EDFAs for small package designs
● High power Fiber laser
PL- HPMI-☆-A8▽-W□□□□-□□-□-XX(HPMIBP:Hbrid PM Version Isolator)
☆ ：Handling Power
L:900um Loose tube
F:Fast axis aligment
S:Slow axis aligment
XX: Fiber and Connector Type
FUDA= FUD-3460 10/125 fiber + FC/APC
FUDP= FUD-3460 10/125 fiber + FC/PC
FUDN= FUD-3460 10/125 fiber+None
PP= PM 20/125 fiber + FC/PC
PA= PM 20/125 fiber + FC/APC
Laser Components Safety
Due to the small size of the Fiber optic module, the box packaging is labeled with the laser radiation hazard symbol and safety warning labels shown below:
Safety and Operating Considerations
The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the fiber when the device is in operation.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.
Operating the laser Components outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.