The LD-PD'S PL-PMI Series is Polarization Maintaining Isolator. This is one High power fiber optic components we special design for Ultra short pulse fiber laser.And now wavelength at850nm,980nm,1030nm,1064nm,1550nm,1560nm is available, This Unit Can handle maximum average power at 10w. We can help Customize according to Customer's Requirements.
|Picture||Name||Part NO.||Description||Central wavelength||Handling Power||Connector||Lead Time||Price||Operation|
● High Power Stability
● Low Insertion Loss
● High Isolation
● High Extinction Ratio
Tsub=25°C, CW bias unless stated otherwise
Center Wavelength (λc)
Typ. Peak Isolation
Min. Isolation, λc, 23
Typ. Insertion Loss, λc, 23
Max. Insertion Loss, λc, all temperature
Min. Extinction Ratio
Min. Return Loss (Input/Output)
Max. Average Optical Power
Max. Peak Power for ns Pulse
Max. Tensile Load
-5 to +50
-40 to +85
1.*IL is 0.5 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added.
2.*Connector key is aligned to slow axis.
PM980 Fiber Nominal Characteristics and Tolerances
● Femto-second Fiber laser application
● Dense wavelength division multiplexing (DWDM)
● EDFAs for small package designs
● High power Fiber laser
(PMI: Polarization Maintaining Isolator)
☆ ：Handling Power
L:900um Loose tube
F:Fast axis aligment
S:Slow axis aligment
B:Both Axis Work
XX: Fiber and Connector Type
FUDA= FUD-3460 10/125 fiber + FC/APC
FUDP= FUD-3460 10/125 fiber + FC/PC
FUDN= FUD-3460 10/125 fiber+None
PP= PM980 fiber + FC/PC
PA= PM980 fiber + FC/APC
Laser Components Safety
Due to the small size of the Fiber optic module, the box packaging is labeled with the laser radiation hazard symbol and safety warning labels shown below:
Safety and Operating Considerations
The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the fiber when the device is in operation.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.
Operating the laser Components outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.