Ideal-photonics's 1x2 or 2x1 optical switch is an all solid-state device without any moving parts. The switching of the optical signal is based on well-known Faraday Effect, and realized by using a patent protected non-mechanical configuration with solid-state all-crystal design which eliminates the need for mechanical movement. The microsecond fiber optic switch is designed to meet the most demanding switching requirements for reliability, durability, speed, and none-stopping high frequency switching; more specifically, is designed to maintain the polarization state of incoming optical signal.
* . All the specifications are based on the devices without connectors, and guaranteed over the operating temperature ranges, wavelength ranges and all polarization states.
* *. Specifications are subject to change without notice.
Electrical Specifications
Parameter
Value
unit
Regular
Ultra-fast
Switching Speed
200~400
10~30
μs
Switching Voltage (VCC)
5 (+/-5%)
6.0~7.0
V
Switching Current
< 100
< 350
mA
Driving Mode
Voltage or Pulse Driving
Pulse Driving
NA
Pulse Width
>1000
>20
μs
Claim Frequency
<800
< 3000
Hz
Notes:
We provides optional switch driving board at additional charge;
It is recommended to use Ideal-photonics switch driving board for the Ultra-fast switch;
To avoid damaging the Ultra-fast switch, we recommends to set the current limit below 800mA when the power supply voltage is set at 6.0V~7.0V.
